Completed ladies: Babette by EG, unmarked clone, Davtex clone, Twistee Totsy, and 35th Anniversary Barbie |
As shown above, the dyeing, painting, extra detailing, and dressing of all dolls has been completed.
Preferring to wear it with the sleeveless jacket, Babette took another photo. The fashion came with a camera, which is stored. The fashion is missing these three travel brochures.
The unmarked, bubble cut clone is dressed in the reproduction Barbie Poodle Parade fashion. (She's missing her poodle and the original olive green shoes, which had been substituted for white pumps in the above photo.) I thought olive green shoes would look better. So....
...after mixing acrylic paints (black, yellow, and a dab of white), I created olive green paint and painted the white pumps the desired color, as shown above.
Yes, the Poodle Parade fashion looks much better with shoes dyed (I mean painted) to match.
Recall that the above two clones use the two newer Barbie bodies that I dyed. Until I find a body for the Davtex clone, I am using a So in Style Chandra body, which was the closest complexion match I had on hand for her.
Davtex clone head on So in Style Chandra body and custom dressed |
After being redressed, Twistee Totsy was returned to the confines of her original box. She is giving some serious side-eye as a result. |
Likewise, 35th Anniversary Barbie returned to her box. |
Joe and Adam took final photos together. |
Here are some tips for those who might want to try this:
- For your first attempt, use inexpensive vinyl/hard plastic dolls, such as thrift store finds.
- Do apply the dye powder and enhancement packet to boiled water and stir well. If you want to achieve a lighter brown, allow the water to cool some before adding the dolls. The water still needs to be relatively warm for the vinyl/hard plastic to absorb the dye. I believe the hottest water achieves the darkest results. The water was warm when 35th Anniversary Barbie was dipped. As a result, her complexion did not deepen as much as the rest. (According to the iDye Poly instructions, dyeing for clothes is supposed to be done on the stovetop in a pot of boiled water. I did not have an old pot to use and thought my alternate method would work just as well, besides I was dyeing dolls, not clothes.)
- It would be wonderful if iDye Poly was available in variations of brown or perhaps if colors could be mixed to blend a desired hue.
- Rit DyeMore can also be used for dyeing plastics. Since it is liquid, colors can probably be blended to create desired complexions and/or hair colors. (Here's a video of a troll toy being dyed with Rit DyeMore.)
- After dyeing, if you must paint any areas of the doll, a spray gun would work better. I do not own one. If I had to do it over again, I would prime the painted areas first. Because I did not prime, several layers of paint were required and the paint on the first several layers would easily chip. It will still chip, but I am careful handling the painted areas of those dolls.
- For the final painted layers, I mixed matte varnish with the acrylic paint, which I should have done with all layers to eliminate some, if not all chipping.
- Sealing painted areas is optional and probably best.
dbg
Follow my sister blog Ebony-Essence of Dolls in Black
Check out my eBay listings here.